Setting Up iBaby Monitor M6/M6T And Common Setup Problems

Setting up an iBaby video baby monitor takes few seconds only is you do it properly. iBaby Customer Care shares the secrets of correct iBaby Monitor M6/M6T installation and some common problems they see.

There are only few minutes between the time you take your new iBaby wireless baby monitor our of the box and the time you start using it. Here is how to make the setup process smooth and fast.

iBaby Monitor M6/M6T Setup
To install iBaby Monitor M6/M6T, find a spot for installation near your router – preferably in the same  room. Connect your phone to a 2.4 GHz Wi-Fi network, open the iBaby Care app, and create an account. Next, plug in the power adaptor, and wait until you hear the jingle. After that, select ‘Add camera’ in the app, and connect the monitor to your phone with a USB cable. Share Wi-Fi settings and install the monitor. Disconnect the USB cable and you’re ready to go. It’s that easy!

And if you are more of a visual person, here is a short video that explains how to set up iBaby Monitor M6/M6T.

iBaby Monitor M6/M6T Setup Problems
And here are some common problems that users face when setting up the monitor:

  • Setting up the baby monitor on 5.0 GHz Wi-Fi network instead of 2.4 GHz network or being too far away from the router.
  • Rushing through the process and not performing the setup steps in the right order. Remember, create an account, plug in the power cord, hear the jingle, add camera, connect with USB cable.

If you are having trouble setting up your new iBaby Monitor M6/M6T, please do not hesitate to contact our wonderful Customer Care team. They’ll walk you through the process, help resolve any issues, and give you helpful tips. You can call them at 650-396-2436 or email at [email protected] The team is in the office Monday through Friday, 9:00am – 6:00pm PST.